SN75ALS194D
| Parameters | |
|---|---|
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 75ALS194 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 45mA |
| Nominal Supply Current | 45mA |
| Propagation Delay | 10 ns |
| Max Output Voltage | 6V |
| Data Rate | 20 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 2 |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.00005A |
| Number of Transmitters | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
SN75ALS194D Overview
This LED driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package for driving common LEDs.The package of this receiver is Tube.The Driver can transceiver technology has enabled this part to power many solutions for a variety of uses.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver uses 4.75V~5.25V for power supply.As many as 4/0 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.This transceiver is packaged with 16 market standard pinoutsThe base part number 75ALS194 identifies the product type, temperature, package, etc., so you can search for more variants by using it.It is a 16-pin driver IC with enhanced power dissipation controls.An important feature of this ic receiver was its 2-bit resolution capability.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 45mA.A transmitter, or can transceiver that produces radio waves with the aid of an antenna, is used in telecommunications to transmit or send data.
SN75ALS194D Features
Tube package
16 pin count
16 pins
5V power supply
SN75ALS194D Applications
There are a lot of Texas Instruments SN75ALS194D Drivers/Receivers/Transceivers applications.
- Copper connection network
- Wired telephone
- Sensor reporting
- Satellite communications networks
- transmission relay
- Optical sub-assembly (OSA)
- Ship
- Changeing the frequency from IF to RF
- High-speed computer links
- Gigabit Ethernet
