SN75ALS195N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS195 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Operating Supply Current | 35mA |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Data Rate | 20 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 2 |
| Receiver Hysteresis | 120mV |
| ESD Protection | Yes |
| Receive Delay-Max | 22 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS195N Overview
With the enhanced 16-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.This Receiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.PCBs or development boards with Through Hole-types can accommodate this wide receiver.This differential driver consumes 4.75V~5.25V for its power supplyAs many as 0/4 eligible receivers/drivers can be used simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 16 terminations built in for driving or receiving signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.The base part number 75ALS195 identifies the product type, temperature, package, etc., so you can search for more variants by using it.The driver IC has improved power dissipation control.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.Typically, the resolution of this receiver is specified to be 2 bits.There is a voltage input supply of 5V required for the operation of this integrated circuit.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.The part is embedded with 0 drivers, so it can be used with 0 devices.An input voltage of 35mA is recommended for this integrating circuit to be able to drive LEDs.In the case of input current exceeding 35mA, this can transceiver may malfunction.A total of 4 circuits are integrated into this transceiver module, making it an extremely complex transceiver module.
SN75ALS195N Features
Tube package
16 pin count
16 pins
5V power supply
SN75ALS195N Applications
There are a lot of Texas Instruments SN75ALS195N Drivers/Receivers/Transceivers applications.
- Routers
- Satellite radio receiver
- Ship
- Wireless communication
- Point-to-point networking
- IPTV front end
- AV receiver
- Fiber-to-the-desktop
- Remote controls
- Wireless transmission
