SN75C1167DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | RECEIVER 3-STATE OUTPUTS |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 75C1167 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 9mA |
| Max Supply Current | 9mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Half |
| Receiver Hysteresis | 60mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.006A |
| Out Swing-Min | 2 V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C1167DBR Overview
The enhanced 16-SSOP (0.209, 5.30mm Width) package makes it an excellent LED driver.There is a Tape & Reel (TR) package for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 4.5V~5.5V for power supply.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?IC receiver is designed for applications with a temperature of 0°C~70°C.An operating voltage range of 5V is suitable for this line driver ic.This integrated circuit has 16 terminations designed for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.Since the base part number 75C1167 describes the product type, temperature, package, etc., you might get more options by searching with it.This is a 16-pin driver IC with enhanced power dissipation control.This receiver is typically specified with a resolution of 2 bits. There is a voltage input supply of 5V required for the operation of this integrated circuit.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.It implements 1 transceivers in total.This electronic part can have?up to 2 eligible drivers on the field at once.?In addition, the optical transceiver module incorporates a RECEIVER 3-STATE OUTPUTS function that improves the overall stability and accuracy of the signal management.It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 9mA.
SN75C1167DBR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
SN75C1167DBR Applications
There are a lot of Texas Instruments SN75C1167DBR Drivers/Receivers/Transceivers applications.
- TV signal transmission
- Clock radio
- Wireless 3D game
- WDM transmission
- Vehicle
- Automation systems
- Wireless smart house
- Routers
- interconnection between computers
- Wireless teaching
