SN75C1167N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RECEIVER 3-STATE OUTPUTS |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 75C1167 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Half |
| Receiver Hysteresis | 60mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 2 V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C1167N Overview
This LED driver IC features an enhanced 16-DIP (0.300, 7.62mm) package for driving common LEDs.Tube package is used to mount this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 4.5V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.16 terminations are integrated into this wide receiver for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.With the part number 75C1167 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation driver IC with 16 pins.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Through Hole mounting technologies.It is typical for this receiver to have a resolution of 2 bits when it is specified.This transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The driver IC in this product is designed so that it can be powered by 5V.There are 1 transceivers in total that this module isolated transceiver implements.On the integrator circuit are embedded 2 drivers.Additionally, this optical transceiver module features the RECEIVER 3-STATE OUTPUTS function, which improves the stability and accuracy of signal management in general.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 9mA.
SN75C1167N Features
Tube package
16 pin count
16 pins
5V power supply
SN75C1167N Applications
There are a lot of Texas Instruments SN75C1167N Drivers/Receivers/Transceivers applications.
- Transmission stations
- Wireless HD Photography
- Wireless showroom
- Satellite communications networks
- interconnection between computers
- Indoor ad hoc meeting
- Wireless teaching
- WDM transmission
- 1x/2x Fiber Channel
- Desktop radio
