SN75C1167NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RECEIVER 3-STATE OUTPUTS |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 75C1167 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Half |
| Receiver Hysteresis | 60mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 2 V |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C1167NSR Overview
LED drivers benefit from this IC's enhanced 16-SOIC (0.209, 5.30mm Width) package.In the Cut Tape (CT) package, this receiver is mounted.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.5V is the supply voltage range that this line driver ic can efficiently operate with.Wide receiver has 16 terminations built in for driving or receiving signals from data.This transceiver is packaged with 16 market standard pinoutsFor more variants of this part, try searching with the base part number 75C1167, which indicates the product type, temperature, package, etc.An enhanced power dissipation driver IC with 16 pins.There are typically 2 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.The module isolated transceiver implements a total of 1 transceivers.Embedded 2 drivers are included on the integrator circuit.This optical transceiver module also features the RECEIVER 3-STATE OUTPUTS function, improving the overall signal management stability and accuracy.With an input voltage of 9mA, this integrating circuit has the ability to drive LEDs with an output voltage of 9mA.
SN75C1167NSR Features
Cut Tape (CT) package
16 pin count
16 pins
5V power supply
SN75C1167NSR Applications
There are a lot of Texas Instruments SN75C1167NSR Drivers/Receivers/Transceivers applications.
- Aircraft navigation
- Mainframes, workstations or storage devices
- Telecom applications
- Bridges
- Ship
- Transmission stations
- Routers
- Cell phones
- Long-distance fiber optic network applications
- Wireless transmission
