SN75C188D

12V 14 Pin 75C188 Receivers4 Bits 4/0 Drivers/Receivers4 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN75C188D
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 721
Description: 12V 14 Pin 75C188 Receivers4 Bits 4/0 Drivers/Receivers4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	122.413241mg
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
ECCN Code	EAR99
Type	Driver
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	950mW
Technology	BIMOS
Voltage - Supply	±4.5V~15V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	12V
Terminal Pitch	1.27mm
Base Part Number	75C188
Pin Count	14
Output Voltage	10V
Operating Supply Voltage	12V
Nominal Supply Current	160μA
Power Dissipation	950mW
Output Current	10mA
Data Rate	120 kbps
Output Characteristics	TOTEM-POLE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232
Input Characteristics	STANDARD
Max Dual Supply Voltage	15V
Number of Drivers/Receivers	4/0
Driver Number of Bits	4
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	12V
Interface Standard	EIA-232-E; TIA-232-E; V.28
Negative Supply Voltage-Nom	-12V
Transmit Delay-Max	3500 ns
Supply Voltage1-Nom	12V
Output Low Current-Max	0.00001A
Out Swing-Min	8 V
High Level Input Current-Max	0.00001A
Number of Transmitters	4
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN75C188D Overview

The enhanced 14-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.Tube package is used to mount this receiver.With its Driver can transceiver design, this part can be incorporated into a wide range of solutions.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A power supply of ±4.5V~15V is used by this differential driver.There can be up to 4/0 eligible receivers/drivers on the field at the same time with this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.An output voltage range of 12V is sufficient to run this line driver ic efficiently.It is packaged with 14 pinouts that are market standard for this particular transceiver.As the base part number 75C188 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.Wide receiver with enhanced power dissipation control, 14-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This ic receiver provided a 4-bit resolution capability. There is a voltage input supply of 12V required for the operation of this integrated circuit.4 transmitters are present, which produce radio waves for the purpose of transmitting or sending data.It is recommended that the line driver ic's operating temperature be kept above -12V.A voltage of 10V can be delivered by Wide receiver.In this bluetooth transceiver, we are able to get a maximum output current of 10mA.With this integrator circuit you will be able to supply it with dual voltages up to 15V.For this can transceiver the power supply should be able to handle an output voltage of 4.5V since it deals with dual supply voltage.