SN75C188DBR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIMOS |
| Voltage - Supply | ±4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 75C188 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 160μA |
| Data Rate | 120 kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | STANDARD |
| Max Dual Supply Voltage | 15V |
| Number of Drivers/Receivers | 4/0 |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 12V |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| Number of Drivers | 4 |
| Negative Supply Voltage-Nom | -12V |
| Transmit Delay-Max | 3500 ns |
| Supply Voltage1-Nom | 12V |
| Out Swing-Min | 8 V |
| High Level Input Current-Max | 0.00001A |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C188DBR Overview
LED drivers benefit from this IC's enhanced 14-SSOP (0.209, 5.30mm Width) package.In this package, the receiver is mounted in the Cut Tape (CT) format.As a Driver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver consumes ±4.5V~15V for its power supplyAt any one time, this electronic part can have up to 4/0 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.12V is the supply voltage range that this line driver ic can efficiently operate with.There are 14 terminations in this wide receiver so that signals can be driven from the data and received.The transceiver is packaged with 14 market standard pinouts so that it can be easily used.Since the base part number 75C188 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.The driver IC has improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.An input voltage supply of 12V is required to operate the transceiver module.4 drivers are embedded on the integrator circuit.Ideally, the operating temperature of line driver ic should be kept at or above -12V.As part of the design, this line driver integrator circuit has a dual supply voltage arrangement with a maximum of 15V.This can transceiver requires dual supply voltage, so it's best to use a 4.5V power supply.
SN75C188DBR Features
Cut Tape (CT) package
14 pin count
14 pins
SN75C188DBR Applications
There are a lot of Texas Instruments SN75C188DBR Drivers/Receivers/Transceivers applications.
- Fiber distributed data interface (FDDI)
- Ethernet circuitry
- Single fiber bidirectional application
- Desktop PC
- Bridges
- Wireless teaching
- Clock radio
- Bar, KTV wireless entertainment
- Pocket PC
- 1x/2x Fiber Channel
