SN75C189ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Additional Feature | RESPONSE CONTROL |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 75C189 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 700μA |
| Max Supply Current | 700μA |
| Data Rate | 1 Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 970mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| ESD Protection | No |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C189ADR Overview
Driver ICs with enhanced 14-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Cut Tape (CT) package contains this receiver.Being a Receiver can transceiver, this part has empowered many solutions to serve for a variety of applications.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver uses 4.5V~6V for power supply.During operation, this electronic part may have up to 0/4 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.5V is the supply voltage range that this line driver ic can efficiently operate with.This integrated circuit has 14 terminations designed for driving and receiving signals from data.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.For more variants of this part, try searching with the base part number 75C189, which indicates the product type, temperature, package, etc.14-pin driver chip with enhanced power dissipation.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.There is one driver IC in this package which is intended to be operated by 5V of power.In module isolated transceiver are 4 receivers.Embedded 0 drivers are included on the integrator circuit.In addition, the optical transceiver module's RESPONSE CONTROL function improves signal management accuracy and stability overall.If the input current exceeds 700μA, this can transceiver could malfunction.
SN75C189ADR Features
Cut Tape (CT) package
14 pin count
14 pins
5V power supply
SN75C189ADR Applications
There are a lot of Texas Instruments SN75C189ADR Drivers/Receivers/Transceivers applications.
- Laser diode bonding
- Wireless multimedia center in smart home
- Shortwave receiver
- Sensor reporting
- Radio transmission
- Cell phones
- Long-distance fiber optic network applications
- Switching system
- transmission relay
- Desktop PC
