SN75C3221EPWR
| Parameters | |
|---|---|
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 75C3221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of I/O | 4 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 150 ns |
SN75C3221EPWR Overview
LED drivers with the enhanced 16-TSSOP (0.173, 4.40mm Width) package will be able to drive a variety of common LEDs with ease.Tape & Reel (TR) package is used for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver consumes 3V~5.5V for its power supplyThe field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.You can search with 75C3221 to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 16-pin driver IC with enhanced power dissipation controls.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.It is important to note that this ic receiver had a maximum resolution of 1 bits.There is typically a resolution of 1 bits specified with this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There are 1 transceivers in total implemented by this IC.This optical transceiver module also features the ALSO OPERATES AT 5V SUPPLY function, improving the overall signal management stability and accuracy.There are 4 serial I/Os on board this IC, and it has a standard VGA interface.
SN75C3221EPWR Features
Tape & Reel (TR) package
16 pin count
16 pins
SN75C3221EPWR Applications
There are a lot of Texas Instruments SN75C3221EPWR Drivers/Receivers/Transceivers applications.
- Portable radio
- Wireless access points
- Wireless security systems
- Cell phones
- VoIP phones
- Ship
- Structural bonding
- AV receiver
- Laser diode bonding
- Wireless modems
