SN75C3232DBR
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 75C3232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
SN75C3232DBR Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SSOP (0.209, 5.30mm Width) package.In the Cut Tape (CT) package, this receiver is mounted.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.With respect to the power supply, this differential driver uses 3V~5.5V.As many as 2/2 receivers/drivers are eligible for use on this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.As the base part number 75C3232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.The driver IC has improved power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.There is usually a 2-bit resolution specified for this receiver when it is used.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It implements 1 transceivers in total.On the part, 2 drivers are embedded in order to facilitate the operation of the device.A ALSO OPERATES AT 5V SUPPLY function is also included in this optical transceiver module, which improves stability and accuracy of signal management.
SN75C3232DBR Features
Cut Tape (CT) package
16 pin count
16 pins
SN75C3232DBR Applications
There are a lot of Texas Instruments SN75C3232DBR Drivers/Receivers/Transceivers applications.
- Telecom applications
- Interconnection between switches and computers
- Car radio
- Remote controls
- Wireless showroom
- Metro access rings
- Home theater wiring-free
- Aircraft positioning
- Structural bonding
- Notebook
