SN75C3232DR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 75C3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C3232DR Overview
With the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Cut Tape (CT) package is used to mount this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver uses 3V~5.5V for power supply.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.An operating voltage range of 3.3V is suitable for this line driver ic.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.For more variants of this part, try searching with the base part number 75C3232, which indicates the product type, temperature, package, etc.The driver IC has improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.This receiver is typically specified with a resolution of 2 bits. This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.It implements 1 transceivers in total.On the integrator circuit are embedded 2 drivers.With the ALSO OPERATES AT 5V SUPPLY function, this optical transceiver module improves accuracy and stability of signal management overall.With this integrating circuit you can drive LEDs of a voltage of up to 1mA. It can be used to drive large displays.
SN75C3232DR Features
Cut Tape (CT) package
16 pin count
16 pins
SN75C3232DR Applications
There are a lot of Texas Instruments SN75C3232DR Drivers/Receivers/Transceivers applications.
- Satellite radio receiver
- Wireless HD Photography
- Broadcast application
- High-speed computer links
- Fiber distributed data interface (FDDI)
- Optical sub-assembly (OSA)
- Remote controls
- interconnection between switches
- Indoor ad hoc meeting
- Notebook
