SN75C3232DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 75C3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 3.3V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C3232DWR Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.295, 7.50mm Width) package.The package of this receiver is Cut Tape (CT).Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 3V~5.5V for power supply.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver is designed for applications with a temperature of 0°C~70°C.With a voltage range of 3.3V, this driver IC can operate efficiently.This wide receiver has 16 terminations for driving and receiving data signals.This transceiver is packaged with 16 market standard pinoutsSince the base part number 75C3232 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation control is provided by this 16-pin driver IC.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.It is typical for this receiver to have a resolution of 2 bits when it is specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.Transceivers implemented by this IC total 1 in total.The part is embedded with 2 drivers, so it can be used with 2 devices.In addition, the optical transceiver module incorporates a ALSO OPERATES AT 5V SUPPLY function that improves the overall stability and accuracy of the signal management.
SN75C3232DWR Features
Cut Tape (CT) package
16 pin count
16 pins
SN75C3232DWR Applications
There are a lot of Texas Instruments SN75C3232DWR Drivers/Receivers/Transceivers applications.
- Satellite communications networks
- Car alarm systems
- Ship
- Sensor reporting
- IP cameras
- Notebook
- Radio transmission
- High-speed computer links
- Wireless HD Photography
- Datacom networking applications
