SN75C3232EDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 75C3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of I/O | 8 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75C3232EDW Overview
With the enhanced 16-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply for this differential driver is 3V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.This integrated circuit has 16 terminations designed for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.75C3232 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.16-pin driver IC with improved power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There are typically 2 bits of resolution specified in the specifications of this receiver.There is a 5V input voltage supply that can be used to operate this transceiver module.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There are 1 transceivers in total that this module isolated transceiver implements.The integrator circuit has embedded 2 drivers.The ALSO OPERATES WITH 5V SUPPLY function of this optical transceiver module improves the overall stability and accuracy of signal management.This is an IC that comes with a total of 8 standard serial I/O ports.
SN75C3232EDW Features
Tube package
16 pin count
16 pins
SN75C3232EDW Applications
There are a lot of Texas Instruments SN75C3232EDW Drivers/Receivers/Transceivers applications.
- Carrier phase observations
- Shortwave receiver
- Home theater wiring-free
- Wireless access points
- Point-to-point networking
- Precision engineering measurement
- interconnection between switches
- Servers
- Switches
- Laser diode bonding
