SN75HVD1176D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75HVD1176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Data Rate | 40Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 40mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 25 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75HVD1176D Overview
LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.The Tube package contains this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply for this differential driver is 4.75V~5.25V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.Since the base part number 75HVD1176 describes the product type, temperature, package, etc., you might get more options by searching with it.This is a 8-pin driver IC with enhanced power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.Using this ic receiver, you were able to achieve a resolution of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage input supply of 5V required for the operation of this integrated circuit.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 transceivers in total implemented by this IC.It has the ability to drive LEDs with an input voltage of up to about 6mA with the help of this integrating circuit.
SN75HVD1176D Features
Tube package
8 pin count
8 pins
5V power supply
SN75HVD1176D Applications
There are a lot of Texas Instruments SN75HVD1176D Drivers/Receivers/Transceivers applications.
- Structural bonding
- Transmission stations
- Wireless HD Photography
- LAN, SAN, WAN (local, storage, work area networks)
- Switching system
- interconnection between switches
- Satellite communication
- Wireless transmission
- Fiber-to-the-desktop
- interconnection between computers
