SN75HVD12D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 75HVD12 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-485 |
| Operating Supply Current | 15.5mA |
| Nominal Supply Current | 15.5mA |
| Max Supply Current | 15.5mA |
| Data Rate | 1Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 300 ns |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75HVD12D Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tube package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.This wide receiver can be placed on any Surface Mount-type PCB or development board.A differential driver like this uses 3V~3.6V of power.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.3.3V is the supply voltage range that this line driver ic can efficiently operate with.This integrated circuit has 8 terminations designed for driving and receiving signals from data.A package consisting of 8 market standard pinouts is provided with this integrated circuit.With the part number 75HVD12 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation control is provided by this 8-pin driver IC.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.An important feature of this ic receiver was its 1-bit resolution capability.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It implements 1 transceivers in total.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 15.5mA.It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 15.5mA.
SN75HVD12D Features
Tube package
8 pin count
8 pins
SN75HVD12D Applications
There are a lot of Texas Instruments SN75HVD12D Drivers/Receivers/Transceivers applications.
- AV receiver
- Desktop radio
- Long-distance fiber optic network applications
- Fiber-to-the-desktop
- Cable network front end
- Sensor reporting
- Changeing the frequency from IF to RF
- Satellite radio receiver
- Laser diode bonding
- Wireless security systems
