SN75HVD3082EP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 75HVD3082 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 900μA |
| Max Supply Current | 900μA |
| Data Rate | 200kbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75HVD3082EP Overview
LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.Tube package is used to mount this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Through Hole-type PCB or development board, this wide receiver can be placed.A power supply of 4.5V~5.5V is used by this differential driver.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 5V can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the base part number 75HVD3082 describes the product type, temperature, package, etc., you might get more options by searching with it.Wide receiver with enhanced power dissipation control, 8-pin.An important feature of this ic receiver was its 1-bit resolution capability.There is usually a 1-bit resolution specified for this receiver when it is used.This transceiver module is designed to operate from an input voltage supply of 5V.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers implemented in this module isolated transceiver.Using the input voltage of 900μA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.A can transceiver that has a current input of 900μA or greater may be affected by malfunctions.
SN75HVD3082EP Features
Tube package
8 pin count
8 pins
5V power supply
SN75HVD3082EP Applications
There are a lot of Texas Instruments SN75HVD3082EP Drivers/Receivers/Transceivers applications.
- Structural bonding
- AV receiver
- IP cameras
- Bar, KTV wireless entertainment
- Pocket PC
- IPTV front end
- Ship
- Remote controls
- Satellite communication
- Single to Multimode Fiber Conversion
