SN75LBC170DBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 75LBC170 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Data Rate | 30Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/3 |
| Receiver Number of Bits | 3 |
| Duplex | Half |
| Receiver Hysteresis | 40mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Out Swing-Min | 1 V |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC170DBRG4 Overview
LED drivers benefit from this IC's enhanced 16-SSOP (0.209, 5.30mm Width) package.In this package, the receiver is mounted in the Tape & Reel (TR) format.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 4.75V~5.25V.The field can have up to 3/3 eligible receivers/drivers at once when using this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.5V is the supply voltage range that this line driver ic can efficiently operate with.Wide receiver has 16 terminations built in for driving or receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.This part number 75LBC170 can be used to search for more variants based on the product type, temperature, package, etc.16-pin driver chip with enhanced power dissipation.Typically, the resolution of this receiver is specified to be 3 bits.There is a voltage input supply of 5V required for the operation of this integrated circuit.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 transceivers implemented in this module isolated transceiver.The integrator circuit comes with embedded 3 drivers.It has the ability to drive LEDs with an input voltage of up to about 20mA with the help of this integrating circuit.
SN75LBC170DBRG4 Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
SN75LBC170DBRG4 Applications
There are a lot of Texas Instruments SN75LBC170DBRG4 Drivers/Receivers/Transceivers applications.
- Changeing the frequency from IF to RF
- Structural bonding
- interconnection between computers
- Desktop PC
- Wireless projection application for conferences
- Interconnection between switches and computers
- Fiber optic cable connection network
- Datacom networking applications
- Data center
- Mainframes, workstations or storage devices
