SN75LBC171DB
| Parameters | |
|---|---|
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/3 |
| Receiver Number of Bits | 3 |
| Duplex | Half |
| Receiver Hysteresis | 40mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 1 V |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 75LBC171 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Data Rate | 30Mbps |
| Differential Output | YES |
SN75LBC171DB Overview
This LED driver IC features an enhanced 20-SSOP (0.209, 5.30mm Width) package for driving common LEDs.The Tube package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses 4.75V~5.25V of power.As many as 3/3 receivers/drivers are eligible for use on this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 20 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 20-pin layout that follows the market standard.This part number 75LBC171 can be used to search for more variants based on the product type, temperature, package, etc.20-pin driver chip with enhanced power dissipation.As a general rule, this receiver has a resolution of 3 bits that is usually specified.This transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.Driver ICs such as this one are designed to operate from 5V power sources.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The integrator circuit has embedded 3 drivers.An input voltage of 20mA is recommended for this integrating circuit to be able to drive LEDs.
SN75LBC171DB Features
Tube package
20 pin count
20 pins
5V power supply
SN75LBC171DB Applications
There are a lot of Texas Instruments SN75LBC171DB Drivers/Receivers/Transceivers applications.
- 1x/2x Fiber Channel
- Car alarm systems
- Aircraft positioning
- interconnection between switches
- Single to Multimode Fiber Conversion
- Vehicle
- Wireless projection application for conferences
- Broadcast application
- Wireless security systems
- Clock radio
