SN75LBC175AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 75LBC175 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Data Rate | 50Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Driver Number of Bits | 4 |
| Receiver Hysteresis | 40mV |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Number of Receivers | 4 |
| High Level Input Current-Max | 0.0001A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC175AD Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package.In this package, the receiver is mounted in the Tube format.Several solutions have used this Receiver can transceiver in a variety of applications due to its Receiver IC nature.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 4.75V~5.25V.There can be up to 0/4 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.An operating voltage range of 5V is suitable for this line driver ic.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.You can search with 75LBC175 to get more variants of this part, since it identifies the product type, temperature, package, etc.An enhanced power dissipation control is provided by this 16-pin driver IC.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.This ic receiver provided a 4-bit resolution capability. There is a 5V input voltage supply that can be used to operate this transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.A 4 receiver is included.This integrating circuit is able to drive LEDs with an input voltage of 20mA.
SN75LBC175AD Features
Tube package
16 pin count
16 pins
5V power supply
SN75LBC175AD Applications
There are a lot of Texas Instruments SN75LBC175AD Drivers/Receivers/Transceivers applications.
- Notebook
- Point-to-point networking
- Ship
- Optical sub-assembly (OSA)
- LAN, SAN, WAN (local, storage, work area networks)
- Precision geodetic measurement
- Wireless access points
- Automation systems
- Broadcast application
- Sensor reporting
