SN75LBC176AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75LBC176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | RS-485 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Output Current | 60mA |
| Data Rate | 30Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Ambient Temperature Range High | 70°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC176AD Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver consumes 4.75V~5.25V for its power supplyIt is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.With the part number 75LBC176 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation control driver IC featuring 8 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It provided a 1-bit resolution capability with this ic receiver.This receiver is typically specified with a resolution of 1 bits. As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.This IC implements 1 transceivers overall.Using a 15mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.This optical transceiver is embedded with 2 channels in total.In this bluetooth transceiver, a 60mA output current is provided as an output.
SN75LBC176AD Features
Tube package
8 pin count
8 pins
5V power supply
2 channels
SN75LBC176AD Applications
There are a lot of Texas Instruments SN75LBC176AD Drivers/Receivers/Transceivers applications.
- Satellite radio receiver
- Shortwave receiver
- Wireless network systems
- Pocket PC
- Notebook
- Transmission stations
- Televisions
- transmission relay
- Ethernet circuitry
- Data center
