SN75LBC176ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75LBC176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 15mA |
| Max Supply Current | 15mA |
| Data Rate | 30Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 20 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC176ADR Overview
The enhanced 8-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The receiver is packaged in a Tape & Reel (TR) package.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.As many as 1/1 receivers/drivers are eligible for use on this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.8 terminations are integrated into this wide receiver for driving and receiving signals from data.A package consisting of 8 market standard pinouts is provided with this integrated circuit.Since the base part number 75LBC176 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.Wide receiver with enhanced power dissipation control, 8-pin.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a capability of 1-bit resolution with this ic receiver.In the case of this receiver, a resolution of 1 bits is typically specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.IC5V is a high performance driver IC designed to work with a 5V power supply.ICs implement a total of 1 transceivers.Input currents exceeding 15mA may cause this can transceiver to malfunction.
SN75LBC176ADR Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
SN75LBC176ADR Applications
There are a lot of Texas Instruments SN75LBC176ADR Drivers/Receivers/Transceivers applications.
- Laser diode bonding
- Wireless showroom
- interconnection between computers
- High-speed computer links
- Broadcast application
- Home theater wiring-free
- Remote controls
- Wireless network systems
- Single to Multimode Fiber Conversion
- Wireless teaching
