SN75LBC176P

8 Terminations5V 8 Pin 75LBC176 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN75LBC176P
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 680
Description: 8 Terminations5V 8 Pin 75LBC176 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	440.409842mg
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Line Driver or Receivers
Technology	BICMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	75LBC176
Pin Count	8
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-485
Operating Supply Current	1.5mA
Nominal Supply Current	1.5mA
Output Current	60mA
Data Rate	30Mbps
Output Characteristics	3-STATE
Differential Output	YES
Nominal Input Voltage	2V
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	50mV
Number of Transceivers	1
Receive Delay-Max	33 ns
Simplex/Duplex	Half Duplex
Transmit Delay-Max	25 ns
Supply Voltage1-Nom	5V
Max Junction Temperature (Tj)	140°C
Ambient Temperature Range High	70°C
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN75LBC176P Overview

The enhanced 8-DIP (0.300, 7.62mm) package makes it an excellent LED driver.The receiver is packaged in a Tube package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.The wide receiver can be mounted on any Through Hole-type PCB or development board.With respect to the power supply, this differential driver uses 4.75V~5.25V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.Since the part number 75LBC176 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control driver IC featuring 8 pins.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 1 transceivers in total that this module isolated transceiver implements.Input voltage is set to a value of 1.5mA, and this integrating circuit is capable of driving LEDs with that voltage.In this case, the output current of the bluetooth transceiver is 60mA.