SN75LBC179AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75LBC179 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Max Supply Current | 15mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 30Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 20 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC179AD Overview
The enhanced 8-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The receiver is packaged in a Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.An operating voltage range of 5V is suitable for this line driver ic.This wide receiver has 8 terminations for driving and receiving data signals.In this package, you will find 8 market-standard pinouts for this transceiver.Since the base part number 75LBC179 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.An important feature of this ic receiver was its 1-bit resolution capability.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a voltage supply of 5V required in order for this transceiver module to be operated.There is a subcategory named Line Driver or Receivers for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.It has the ability to drive LEDs with an input voltage of up to about 15mA with the help of this integrating circuit.It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 15mA.
SN75LBC179AD Features
Tube package
8 pin count
8 pins
5V power supply
SN75LBC179AD Applications
There are a lot of Texas Instruments SN75LBC179AD Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- Switches
- Wireless teaching
- Metro access rings
- Shortwave receiver
- Wireless interactive experience
- interconnection between switches
- Home theater wiring-free
- Ethernet circuitry
- Clock radio
