SN75LBC179AP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 75LBC179 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Nominal Supply Current | 15mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 30Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 20 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC179AP Overview
With the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.In this package, the receiver is mounted in the Tube format.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.A power supply of 4.75V~5.25V is used by this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.There are 8 pinouts available on this transceiver which are market standard.75LBC179 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 8-pin driver IC with enhanced power dissipation control is featured here.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.An important feature of this ic receiver was its 1-bit resolution capability.There is usually a 1-bit resolution specified for this receiver when it is used.There are two types of input voltage supply available for this IC, 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.The module isolated transceiver implements a total of 1 transceivers.
SN75LBC179AP Features
Tube package
8 pin count
8 pins
5V power supply
SN75LBC179AP Applications
There are a lot of Texas Instruments SN75LBC179AP Drivers/Receivers/Transceivers applications.
- Wireless modems
- Structural bonding
- Ethernet circuitry
- Sensor reporting
- Pocket PC
- Ship
- Aircraft positioning
- Satellite radio receiver
- Fast Ethernet
- VoIP phones
