SN75LBC179P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 75LBC179 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 45mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 30 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC179P Overview
With the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Through Hole-type PCB or development board, you can install this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.5V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.Transceiver comes with 8 standard pinouts that meet the market's requirements.With the part number 75LBC179 identifying the product type, temperature, package, etc., you can search with it to see more variants.8-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.There is a capability of 1-bit resolution with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.Driver ICs such as this one are designed to operate from 5V power sources.In total, there are 1 transceivers implemented by this module isolated transceiver.Using a 5mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.
SN75LBC179P Features
Tube package
8 pin count
8 pins
5V power supply
SN75LBC179P Applications
There are a lot of Texas Instruments SN75LBC179P Drivers/Receivers/Transceivers applications.
- High-speed computer links
- Wired telephone
- Cordless telephone
- TV signal transmission
- Remote controls
- Notebook
- Car alarm systems
- Automation systems
- Tuner
- Cable network front end
