SN75LBC180N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 75LBC180 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 45mV |
| Receive Delay-Max | 33 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Number of Receivers | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC180N Overview
The enhanced 14-DIP (0.300, 7.62mm) package makes it an excellent LED driver.The Tube package contains this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Through Hole-type PCB or development board, you can install this wide receiver.This differential driver uses 4.75V~5.25V for power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.Transceiver comes with 14 standard pinouts that meet the market's requirements.The base part number 75LBC180 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control is provided by this 14-pin driver IC.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Through Hole mounting technologies.It was possible to achieve a 1-bit resolution through this ic receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.There is a subcategory called Line Driver or Receivers for this rf transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.There are also 1 receivers in it as well.With an input voltage of 5mA, this integrating circuit has the ability to drive LEDs with an output voltage of 5mA.
SN75LBC180N Features
Tube package
14 pin count
14 pins
5V power supply
SN75LBC180N Applications
There are a lot of Texas Instruments SN75LBC180N Drivers/Receivers/Transceivers applications.
- AV receiver
- Transmission stations
- Home theater wiring-free
- Wireless projection application for business talks
- TV signal transmission
- Long-distance fiber optic network applications
- Satellite ground stations
- Shortwave receiver
- Single to Multimode Fiber Conversion
- VoIP phones
