SN75LBC182D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75LBC182 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 30mA |
| Data Rate | 250kbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.00005A |
| Number of Receivers | 1 |
| High Level Input Current-Max | 0.00005A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC182D Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.This transceiver is packaged with 8 market standard pinoutsThe base part number 75LBC182 identifies the product type, temperature, package, etc., so you can search for more variants by using it.Wide receiver with enhanced power dissipation control, 8-pin.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.It was possible to achieve a 1-bit resolution through this ic receiver.An input voltage supply of 5V is required to operate the transceiver module.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.The module isolated transceivers are 1 receivers.Input voltage is set to a value of 30mA, and this integrating circuit is capable of driving LEDs with that voltage.
SN75LBC182D Features
Tube package
8 pin count
8 pins
5V power supply
SN75LBC182D Applications
There are a lot of Texas Instruments SN75LBC182D Drivers/Receivers/Transceivers applications.
- Point-to-point networking
- IPTV front end
- interconnection between switches
- Wireless communication
- Fiber-to-the-desktop
- VoIP phones
- Optical sub-assembly (OSA)
- transmission relay
- LAN, SAN, WAN (local, storage, work area networks)
- Car alarm systems
