SN75LVDS86ADGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 200.601226mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | FlatLink™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.637W |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 75LVDS86 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Operating Supply Current | 68mA |
| Power Dissipation | 1.637W |
| Supply Current-Max | 40mA |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 3 |
| Interface Standard | EIA-644; TIA-644 |
| Number of Drivers | 21 |
| Receive Delay-Max | 7 ns |
| Supply Voltage1-Nom | 3.3V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LVDS86ADGGR Overview
Designed for common LEDs, this driver IC features an enhanced 48-TFSOP (0.240, 6.10mm Width) package.Cut Tape (CT) package is used to mount this receiver.Being a Receiver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 3V~3.6V.This electronic part can have?up to 0/4 eligible receivers/drivers on the field at once.?This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.In this wide receiver, 48 terminations are integrated for driving and receiving signals from data.As a standard package, this transceiver comes with a 48-pin layout that follows the market standard.The base part number 75LVDS86 identifies the product type, temperature, package, etc., so you can search for more variants by using it.48-pin driver IC with improved power dissipation control.In most cases, the receiver will be specified with a 3-bit resolution.This transceiver module is designed to operate from an input voltage supply of 3.3V.Embedded 21 drivers are included on the integrator circuit.It is important to supply enough input current to the VCC pin of the ic receiver, but not exceeding 40mA.With this integrating circuit you can drive LEDs of a voltage of up to 68mA. It can be used to drive large displays.One of the integrating circuits in the FlatLink? series represents a technique for enhancing power effintegrating circuitiency.The integrated circuit consists of 3 elements that ensure effintegrated circuitient handling of multiple tasks.
SN75LVDS86ADGGR Features
Cut Tape (CT) package
48 pin count
48 pins
FlatLink? series
3 elements
SN75LVDS86ADGGR Applications
There are a lot of Texas Instruments SN75LVDS86ADGGR Drivers/Receivers/Transceivers applications.
- Wired telephone
- Telecom applications
- Wireless smart house
- Long-distance fiber optic network applications
- Gigabit Ethernet
- Point-to-point networking
- Mainframes, workstations or storage devices
- Automation systems
- Low power, low voltage systems
- Datacom networking applications
