SN75LVDS86DGG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 200.601226mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | FlatLink™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.316W |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 75LVDS86 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Nominal Supply Current | 100mA |
| Power Dissipation | 1.316W |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Data Rate | 178.5 kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 3 |
| Interface Standard | EIA-644; TIA-644 |
| Number of Drivers | 21 |
| Supply Voltage1-Nom | 3.3V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LVDS86DGG Overview
Designed for common LEDs, this driver IC features an enhanced 48-TFSOP (0.240, 6.10mm Width) package.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Receiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 3V~3.6V for power supply.As many as 0/4 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.With a voltage range of 3.3V, this driver IC can operate efficiently.Integrated into this wide receiver are 48 terminations that are used for driving and receiving signals from data.A package consisting of 48 market standard pinouts is provided with this integrated circuit.The base part number 75LVDS86 identifies the product type, temperature, package, etc., so you can search for more variants by using it.It is a 48-pin driver IC with enhanced power dissipation controls.There are typically 3 bits of resolution specified in the specifications of this receiver.There is a voltage input supply of 3.3V required for the operation of this integrated circuit.Embedded 21 drivers are included on the integrator circuit.One of the FlatLink? series, representing an enhanced power-saving method, is this integrating circuit.In order to handle multiple tasks effintegrated circuitiently, this integrated circuit contains 3 elements.
SN75LVDS86DGG Features
Tube package
48 pin count
48 pins
FlatLink? series
3 elements
SN75LVDS86DGG Applications
There are a lot of Texas Instruments SN75LVDS86DGG Drivers/Receivers/Transceivers applications.
- Wireless transmission
- Aircraft navigation
- Wireless network systems
- Vehicle
- Pocket PC
- Ship
- IP cameras
- Wireless communication
- Wireless HD Photography
- Wireless modems
