SNJ54ABT623AJ
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7.1 ns |
| Quiescent Current | 22mA |
| Family | ABT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.064 A |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 30mA |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.2mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54ABT623AJ Overview
Logical driver uses a neat CDIP package. Rail/Tube external packaging. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Transceiver shares the ABT family's comprehensive benefits and features. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 22mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V.
SNJ54ABT623AJ Features
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
SNJ54ABT623AJ Applications
There are a lot of Texas Instruments SNJ54ABT623AJ Buffers & Transceivers applications.
- Single fiber bidirectional application
- Fiber distributed data interface (FDDI)
- interconnection between computers
- TV signal transmission
- Cable network front end
- Gigabit Ethernet
- Single to Multimode Fiber Conversion
- Wireless communication
- Wireless projection application for conferences and business talks
- Carrier phase observations
