banner_page

SNJ54ALS373AFK

D-Type, Latch 8 Bits TTL Latches 20 Pins QUAD TTL CLCC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SNJ54ALS373AFK
  • Package: CLCC
  • Datasheet: -
  • Stock: 262
  • Description: D-Type, Latch 8 Bits TTL Latches 20 Pins QUAD TTL CLCC(Kg)

Details

Tags

Parameters
ECCN Code EAR99
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Subcategory FF/Latches
Technology TTL
Terminal Position QUAD
Number of Functions 1
Supply Voltage 5V
Pin Count 20
Output Type TTL
Operating Supply Voltage 5V
Number of Elements 1
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade MILITARY
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 25mA
Number of Bits 8
Propagation Delay 19 ns
Turn On Delay Time 2 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current -1mA
Low Level Output Current 1mA
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 27mA
Number of Input Lines 8
Count Direction UNIDIRECTIONAL
Height 2.03mm
Length 8.89mm
Width 8.89mm
Thickness 1.83mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Package / Case CLCC
Number of Pins 20
Packaging Rail/Tube
Number of Terminations 20

SNJ54ALS373AFK Overview


There is an embedded version of it in package CLCC. A Rail/Tube package is used to package it. TTL is used for the output it is configured with. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The supply voltage of the device is 5V. 20 pins are provided. ALS is the family of this electronic device. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. Subcategory FF/Latches contains this part. A total of 5V power supplies are needed to run it. It consists of 8 input lines from which an electronic circuit can be built. For maximum efficiency, the supply voltage should be set to 5V. It consists of 1 elements. A maximal power current (ICC) is generated for its operation at 27mA. 1mA is the low level output current. There is -1mA high level output current set. Ideally, the operating temperature should be lower than 125°C. It is recommended to operate at a temperature higher than -55°C. 5.5V is the maximum voltage it supports. This device requires a minimum voltage of 4.5V. A logic IC that is used in this application is BUS DRIVER.

SNJ54ALS373AFK Features


CLCC package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements

SNJ54ALS373AFK Applications


There are a lot of Texas Instruments SNJ54ALS373AFK Latches applications.

  • Avionics
  • Buffer/Storage Registers
  • Automotive Infotainment
  • Clocks
  • Decade counting
  • Phase comparator
  • Buffer Storage
  • Stacked or Push-Down Registers
  • Shift register
  • Counting

Write a review

Note: HTML is not translated!
    Bad           Good