SNJ54LS592FK
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 20 |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | REGISTERED INPUTS |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Propagation Delay | 53 ns |
| Family | LS |
| Logic Function | Counter |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 60mA |
| Load/Preset Input | YES |
| Mode of Operation | ASYNCHRONOUS |
| Height Seated (Max) | 2.03mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS592FK Overview
There are 20 terminations used for its configuration. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. In this diagram, there are 1elements that are interconnected by wires. There are 20pins on all components. To connect the circuit's other components, there are 20pins. The device is mounted in the direction of [0]. Initially, it appears to belong to the LS family. In the device, the information consists of 8 bits. In terms of Pbfree code, the result may be no. It is important to note that in regards to this electronic device, REGISTERED INPUTSis an extremely significant feature. The device has a temperature grade of MILITARY. The device operates on voltage [0]. Electrical characteristics remain stable for extended periods of time at [0]. It operates within a specified temperature range, with the lower limit typically set at -55°C degrees Celsius. The maximum voltage available for the device reaches 5.5V. There is a minimum voltage available for the device of 4.5V.
SNJ54LS592FK Features
REGISTERED INPUTS
Operating supply voltage of 5V
SNJ54LS592FK Applications
There are a lot of Texas Instruments SNJ54LS592FK Counters & Dividers applications.
- Control counters
- Timers
- Time delay circuits
- Signal gating
- DIVISION
- Frequency dividers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Fixed and programmable counters greater than 10
- Divide-by"N" counters/frequency synthesizers
- Programmable decade counters
