SP6134HEU-L
| Parameters | |
|---|---|
| Package / Case | MSOP |
| Surface Mount | YES |
| Number of Pins | 10 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 1W |
| Max Supply Current | 3mA |
| Current - Output | 2A |
| Frequency (Max) | 690kHz |
| Voltage - Output | 10V |
| Input Voltage (Min) | 3V |
| Voltage - Threshold | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 100 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SP6134HEU-L Overview
Capsuled in the MSOP package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. The switching controller can be switched at 600kHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. 10 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. 10 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 3V. The dc to dc regulator can only accept a maximum input voltage of 28V. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Switching controllers operate at 600kHz frequencies. As a result, DC to DC voltage regulator has a value of ALSO OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V so that the need can be met more directly. When running the voltage regulator dc to dc in a circuit, users should apply 5.5V to ensure safety and reliability. The temperature should be at least -40°C. Running the machine at 85°C is ideal. Total number of functions (s) for thare switch converters are 1. We are designing chips that have 10 pins. A maximum frequency of 690kHz can be set by the controller. A 2A input is ideal for this application. As a result of normalworking processes, a voltage of 10V is output. There is a 1.5mA volt supply current. If the current exceeds 3mA, the component may not operate correctly and may even be damaged. The nominal supply current for this the controllers dc is 1.5mA.
SP6134HEU-L Features
Switching Frequency: 600kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 600kHz
ALSO OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V
SP6134HEU-L Applications
There are a lot of Exar Corporation SP6134HEU-L DC to DC converter applications.
- Radio equipment
- Correction machines
- Shearing machines
- Milling machines
- Solar power plants
- Machining centers
- Wind power
- Lathes
- Computer-related products
- Domestic water pumps
