SP7600EN2-L
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 8 |
| Packaging | Cut Tape |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1.44MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 29V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Max Supply Current | 2A |
| Current - Output | 2A |
| Voltage - Output | 214mV |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.44MHz |
| Max Input Voltage | 29V |
| Output Current per Channel | 2A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK |
| Low Level Output Current | 2A |
| Number of Segments | 1 |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SP7600EN2-L Overview
This system operates at 1.44MHz frequency.It operates with 8 terminations.It has a base configuration of 8 pins.It is estimated that there are 1 segments.As you can see, it is mounted by Surface Mount.29V is an acceptable voltage.There is a voltage output of 214mV.The device has a pin count of 8.Furthermore, it can be categorized as Switching Regulator or Controllers based on its characteristics.It operates at a voltage of 4.5V as its minimal input voltage.It works with the minimal supply voltage of 4.5V to meet highest efficiency standards.In the presence of a maximum supply current, the value of 29V will be reached.If the maximum supply current is less than 2A, the device is capable of providing high efficiency.The operating temperature should not exceed 125°C to ensure stable operation.The operating temperature should be higher than -40°C so as to realize stable operation.Set the part output current to 2A.Device employs SWITCHING REGULATOR analog IC.
SP7600EN2-L Features
Frequency of 1.44MHz
SP7600EN2-L Applications
There are a lot of Exar Corporation SP7600EN2-L LED Driver ICs applications.
- Stage Lighting and Signage
- White LED Backlight for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Refrigeration lighting
- Amusement Machines
- Street lighting
- General lighting
