SPA121M06B
| Parameters | |
|---|---|
| Length | 7.2898mm |
| Width | 4.2926mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2917 (7343 Metric) |
| Surface Mount Land Size | 0.287Lx0.169W 7.30mmx4.30mm |
| Operating Temperature | -40°C~105°C |
| Packaging | Bulk |
| Published | 2014 |
| Series | SPA |
| Size / Dimension | 0.287Lx0.169W 7.30mmx4.30mm |
| Tolerance | ±20% |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Rated | 6.3V |
| Capacitance | 120μF |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Lifetime @ Temp | 1000 Hrs @ 105°C |
| Ripple Current | 3.5A |
| Life (Hours) | 1000 hours |
| Ripple Current @ High Frequency | 3.5A @ 100kHz |
| Height Seated (Max) | 0.110 2.80mm |
The capacitance can run at the range of 120μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of 2917 (7343 Metric). This capacitor is accessible in the Bulk packaging. It belongs to SPA series. This part is mounted in the way of Surface Mount. The type of the SPA121M06B capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -40°C~105°C. Cornell Dubilier Electronics (CDE) SPA121M06B is suitable to conduct the ripple current at 3.5A. SPA121M06B Capacitor is mounted by Surface Mount. SPA121M06B Capacitor. Voltage - Rated often has values of 6.3V. This device's minimum working temperature must not be less than -40°C. It's recommended that you utilize it when the temperature is below 105°C.
SPA Series
Capacitance: 120μF
Tolerance: ±20%
Package / Case: 2917 (7343 Metric)
Packaging: Bulk
Works Operating Temperature: -40°C~105°C
There are great quantities of applications of SPA121M06B Aluminum Polymer Capacitors.
Typically, SPA121M06B is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To reduce power noise & signal noise
- To enhance power efficiency
- DC/DC, DC/AC, and AC/AC converters
- Spot Welding
- Signal decoupling & power bypass
- Motor Start
- Power Line Buffering
- Voltage Doubling
- Frequency Converters
- Bypassing Noise Filtering
