SR13C-A1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Snap in |
| Package / Case | Module |
| Number of Pins | 3 |
| Actuator Material | Magnet, South Pole |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Bulk |
| Published | 1999 |
| Series | SR13 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire |
| Type | Unipolar Switch |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 3.8V~30V |
| Depth | 11.43mm |
| Current Rating | 13mA |
| Termination Style | Wire Leads |
| Output Type | Digital |
| Lead Length | 152mm |
| Max Output Current | 20mA |
| Operating Supply Voltage | 25V |
| Leakage Current | 5μA |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.8V |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 13mA |
| Output Current | 20mA |
| Min Output Voltage | 400mV |
| Sensing Method | Hall Effect |
| Max Supply Voltage (DC) | 30V |
| Min Supply Voltage (DC) | 3.8V |
| Must Operate | 18mT |
| Switching Current | 50mA |
| Must Release | 7.5mT |
| Height | 11.5mm |
| Length | 7.62mm |
| Width | 10.7m |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SR13C-A1 Overview
Magnetic position sensors are packaged in Module packages. In magnetic position sensors, -40°C can be set as the minimum operating temperature. For this sensor module to operate properly, the operating temperature should not exceed 150°C. Designed to protect the devices against damage, this electronic part is packaged within the Bulk. Modules with 3 pins are used for sensors. During operation, the magnetic position sensors modules should apply a voltage of 25V. The current drawn by the magnetic position sensors modules could be 13mA. Sensor modules draw 13mA current in general. The sensor modules should carry 20mA current for good performance. As far as sensors modules are concerned, the maximum voltage value is 30V. In contrast, the minimum voltage value supplied by sensors modules should be 3.8V.
SR13C-A1 Features
Package / Case: Module
SR13 Series
Operating Temperature: -40°C~150°C TA
Supply Voltage: 3.8V~30V
3 Pins
Operating Supply Voltage: 25V
Operating Supply Current: 13mA
SR13C-A1 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SR13C-A1 Magnetic Position Sensors Modules applications.
- Factory automation
- Convertible roof position
- Industrial process control
- Anti-lock braking systems
- Dyno testing
- Gear shift selectors and driver controls (PRNDL)
- Open/close sensor for LCD screens/doors/lids/trunks
- Brushless DC (direct current) motor commutation
- Steering position
- Discrimination of ferromagnetic
