SR13R-A1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Snap in |
| Package / Case | Module |
| Number of Pins | 3 |
| Actuator Material | Magnet, South Pole |
| Operating Temperature | -40°C~150°C TA |
| Published | 1999 |
| Series | SR13 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Bipolar Switch |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 3.8V~30V |
| Current Rating | 13mA |
| Termination Style | Wire Leads |
| Output Voltage | 400mV |
| Output Type | Digital |
| Max Output Current | 20mA |
| Leakage Current | 5μA |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.8V |
| Nominal Supply Current | 13mA |
| Output Current | 20mA |
| Min Output Voltage | 400mV |
| Max Supply Voltage (DC) | 30V |
| Min Supply Voltage (DC) | 3.8V |
| Must Operate | 8.5mT |
| Must Release | -8.5mT |
| Width | 10.7m |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
SR13R-A1 Overview
Module packages are used for the magnetic position sensor modules. You can specify -40°C as the minimum operating temperature for magnetic position sensors modules. Sensor modules should be used at a temperature no higher than 150°C if they are to perform properly. Modules with sensors have 3 pins. Generally, this sensor module draws 13mA current. If you wish to achieve good performance, the sensor modules should carry 20mA current. When it operates, sensor modules should have a voltage value of 30V. It is recommended that the minimum voltage supplied by sensors modules be 3.8V.
SR13R-A1 Features
Package / Case: Module
SR13 Series
Operating Temperature: -40°C~150°C TA
Supply Voltage: 3.8V~30V
3 Pins
SR13R-A1 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SR13R-A1 Magnetic Position Sensors Modules applications.
- Motor and fan control
- Flow metering
- Speedometers
- Steering position
- Generator set
- Discrimination of ferromagnetic
- Localization of ferromagnetic
- Commutation of brushless DC motors
- Magnetic encoders
- Wiper home/end position sensor
