Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
Module |
Number of Pins |
3 |
Operating Temperature |
-40°C~150°C TA |
Published |
1999 |
Series |
SR15 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Wire Leads |
Type |
Unipolar Switch |
Max Operating Temperature |
150°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
3.8V~30V |
Depth |
5.1mm |
Current Rating |
13mA |
Termination Style |
Wire Leads |
Output Type |
Current |
Max Output Current |
20mA |
Leakage Current |
5μA |
Max Supply Voltage |
30V |
Min Supply Voltage |
3.8V |
Nominal Supply Current |
13mA |
Output Current |
20mA |
Min Output Voltage |
400mV |
Max Supply Voltage (DC) |
30V |
Min Supply Voltage (DC) |
3.8V |
Must Operate |
18mT |
Switching Current |
20mA |
Must Release |
7.5mT |
Length |
7.6mm |
Width |
10.7m |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
SR15C-A3 Overview
There are Module packages for the magnetic position sensor modules. In magnetic position sensors, -40°C can be set as the minimum operating temperature. As a rule of thumb, it is recommended that the operating temperature of this sensor module does not exceed 150°C. 3 pins can be found on the sensors modules. There is generally 13mA current drawn by these sensors modules. The sensor modules should carry 20mA current for good performance. As far as sensors modules are concerned, the maximum voltage value is 30V. It is, however, recommended that sensors modules provide 3.8V as the minimum voltage.
SR15C-A3 Features
Package / Case: Module
SR15 Series
Operating Temperature: -40°C~150°C TA
Supply Voltage: 3.8V~30V
3 Pins
SR15C-A3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SR15C-A3 Magnetic Position Sensors Modules applications.
- Industrial process control
- Detection of ferromagnetic
- Open/close sensor for LCD screens/doors/lids/trunks
- Motor assemblies
- Steering position
- White goods
- Position and limit sensing
- Antitheft systems
- Commutation of brushless DC motors
- Shafts in transmissions, hydraulic motors, pumps and gear boxes