Parameters |
Factory Lead Time |
1 Week |
Mount |
Screw |
Package / Case |
Slotted Body |
Number of Pins |
3 |
Actuator Material |
Ferrous Vane |
Operating Temperature |
-20°C~85°C TA |
Published |
2000 |
Series |
SR16 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
PCB |
Type |
Hall Effect Sensor |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-20°C |
Voltage - Supply |
3.8V~30V |
Depth |
6.4mm |
Termination Style |
Wire Leads |
Output Type |
Digital |
Max Output Current |
20mA |
Leakage Current |
10μA |
Max Supply Voltage |
30V |
Min Supply Voltage |
3.8V |
Nominal Supply Current |
10mA |
Output Current |
20mA |
Switching Current |
50mA |
Length |
24.6mm |
Width |
10.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
SR16C-N Overview
Modules of magnetic position sensors are packaged in Slotted Body packages. It is possible to set -20°C as the minimum operating temperature for magnetic position sensors modules. The operating temperature of this sensor module should not exceed 85°C. There are 0 pins on the sensors modules. There will generally be 10mA current drawn by this sensors module. If you wish to achieve good performance, the sensor modules should carry 20mA current. In order for a sensor module to operate properly, the maximum voltage should be 30V. In any case, sensors modules should supply 3.8V as their minimum voltage.
SR16C-N Features
Package / Case: Slotted Body
SR16 Series
Operating Temperature: -20°C~85°C TA
Supply Voltage: 3.8V~30V
3 Pins
SR16C-N Applications
There are a lot of Honeywell Sensing and Productivity Solutions SR16C-N Magnetic Position Sensors Modules applications.
- Geomagnetic field measurements
- RPM measurement
- Spindles
- End of travel and index sensors
- Robotics control
- Flow-rate sensing
- Wiper home/end position sensor
- Process speed
- Convertible roof position
- Detection of ferromagnetic