Parameters |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Wire Leads |
Type |
Unipolar Switch |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
4.5V~24V |
Frequency |
100kHz |
Termination Style |
Wire Leads |
Output Type |
Current |
Max Output Current |
10mA |
Leakage Current |
10μA |
Max Supply Voltage |
24V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
19mA |
Output Current |
20mA |
Must Operate |
19mT |
Switching Current |
20mA |
Must Release |
6mT |
RoHS Status |
RoHS Compliant |
Factory Lead Time |
1 Week |
Mount |
Screw, Through Hole |
Package / Case |
Cylinder, Threaded |
Number of Pins |
3 |
Actuator Material |
Magnet, South Pole |
Operating Temperature |
-40°C~85°C TA |
Published |
1998 |
Series |
SR3 |
SR3C-A1 Overview
There are Cylinder, Threaded packages for the magnetic position sensor modules. For magnetic position sensors modules, the minimum operating temperature can be set to -40°C. If the operating temperature is above 85°C, the sensor module will not work properly. The sensors modules have 3 pins. It is generally accepted that this sensors module will draw 19mA current. It is important that the sensor modules carry 20mA current for good performance. When a sensor module is operating, the maximum voltage value should be 24V. It is, however, recommended that sensors modules provide 4.5V as the minimum voltage.
SR3C-A1 Features
Package / Case: Cylinder, Threaded
SR3 Series
Operating Temperature: -40°C~85°C TA
Supply Voltage: 4.5V~24V
Frequency: 100kHz
3 Pins
SR3C-A1 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SR3C-A1 Magnetic Position Sensors Modules applications.
- Angle sensing
- Motor and fan control
- Industrial process control
- Electric window lift
- Magnetic encoders
- Flow-rate sensing
- End of travel and index sensors
- Shafts in transmissions, hydraulic motors, pumps and gear boxes
- Generator set
- Rollers