banner_page

SSCDRRN100MGAA5

SSCDRRN100MGAA5 datasheet pdf and Pressure Sensors, Transducers product details from Honeywell Sensing and Productivity Solutions stock available at Noco


  • Manufacturer: Honeywell Sensing and Productivity Solutions
  • Nocochips NO: 384-SSCDRRN100MGAA5
  • Package: 8-DIP (0.524, 13.30mm), Dual Ports, Same Side
  • Datasheet: PDF
  • Stock: 818
  • Description: SSCDRRN100MGAA5 datasheet pdf and Pressure Sensors, Transducers product details from Honeywell Sensing and Productivity Solutions stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Package / Case 8-DIP (0.524, 13.30mm), Dual Ports, Same Side
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~85°C
Published 2011
Series TruStability® SSC
Feature Amplified Output, Temperature Compensated
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Through Hole
Applications Board Mount
Voltage - Rated DC 5V
Voltage - Supply 4.75V~5.25V
Reach Compliance Code unknown
Output 0.5 V ~ 4.5 V
Termination Style PC Pin
Body Length or Diameter 13.35mm
Body Breadth 9.91 mm
Output Voltage 4.5V
Output Type Analog Voltage
Operating Supply Voltage 5V
Nominal Supply Current 2mA
Max Supply Current 3mA
Accuracy ±0.25%
Response Time 1 ms
Operating Pressure 1.45PSI (10kPa)
Pressure Type Vented Gauge
Port Style Barbed
Port Size Male - 0.08 1.93mm Tube Dual
Maximum Pressure 12.33PSI (85kPa)
Sensors/Transducers Type PRESSURE SENSOR,PEIZORESISTIVE
Housing CERAMIC
Pressure Range-Max 1.45 Psi
Pressure Sensing Mode GAGE
RoHS Status RoHS Compliant

SSCDRRN100MGAA5 Overview


This transducer is included in the 8-DIP (0.524, 13.30mm), Dual Ports, Same Side package for your convenience. Temperature should be set at -40°C~85°C on transducers in order for them to work reliably. When the supply voltage is set to 4.75V~5.25V, the transducers perform well. The transducers can only function properly if the 8 pins are connected. 1.45 Psi is the maximum pressure range set by this transducer. Transducers working with 2mA supply current can function normally. This device requires that the voltage released by the transducers is 4.5V in order to work. It is critical that the DC voltage be 5V, so that the transducers can continuously operate at their rated ambient temperature. The current of the transducers should not exceed 3mA, otherwise it will be dangerous.

SSCDRRN100MGAA5 Features


Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 8-DIP (0.524, 13.30mm), Dual Ports, Same Side
Operating Temperature: -40°C~85°C
8 Pins
TruStability? SSC series
Operating Pressure: 1.45PSI (10kPa)
Operating Supply Voltage: 5V

SSCDRRN100MGAA5 Applications


There are a lot of Honeywell Sensing and Productivity Solutions SSCDRRN100MGAA5 Transducers applications.

  • Hydraulic, brake, and engine oil fluid pressure monitoring
  • Bike computers
  • Internet of things
  • Mobile phones / GPS
  • White goods
  • Vertical velocity monitoring
  • Mobile Phones
  • Hydrogen Storage
  • Weather stations
  • Dataloggers

Write a review

Note: HTML is not translated!
    Bad           Good