Parameters |
Factory Lead Time |
1 Week |
Package / Case |
8-SMD, J-Lead, Dual Ports, Same Side |
Surface Mount |
YES |
Mounting Feature |
SURFACE MOUNT |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Published |
2011 |
Series |
TruStability® SSC |
Feature |
Amplified Output, Temperature Compensated |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Gull Wing |
Applications |
Board Mount |
Voltage - Rated DC |
3.3V |
Voltage - Supply |
3V~3.6V |
Reach Compliance Code |
unknown |
Output |
0.33 V ~ 2.97 V |
Termination Style |
SMD (SMT) Tab |
Output Voltage |
2.97V |
Output Type |
Analog Voltage |
Nominal Supply Current |
1.6mA |
Max Supply Current |
2.1mA |
Accuracy |
±0.25% |
Response Time |
1 ms |
Operating Pressure |
±1PSI (±6.89kPa) |
Pressure Type |
Differential |
Port Style |
Barbed |
Port Size |
Male - 0.08 1.93mm Tube Dual |
Maximum Pressure |
±10PSI (±68.95kPa) |
Sensors/Transducers Type |
PRESSURE SENSOR,PEIZORESISTIVE |
Housing |
CERAMIC |
Max Pressure |
10 PSI |
Pressure Range-Max |
1 Psi |
RoHS Status |
RoHS Compliant |
SSCMRRN001PDAA3 Overview
This transducer is included in the package 8-SMD, J-Lead, Dual Ports, Same Side. It is recommended to set the temperature of the transducers to -40°C~85°C to ensure reliable operation. It is possible to use the transducers with a supply voltage of 3V~3.6V without any problems. In order to make the transducers work properly, the 8 pins must be connected. This transducer can handle pressures up to 1 Psi. A nominal supply current of 1.6mA can make the transducers operate normally. For it to work, the transducers should release 2.97V voltage. For the transducers to continuously work at the rated ambient temperature, DC voltage should be 3.3V. The current of the transducers should not exceed 2.1mA, otherwise it will be dangerous.
SSCMRRN001PDAA3 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 8-SMD, J-Lead, Dual Ports, Same Side
Operating Temperature: -40°C~85°C
8 Pins
TruStability? SSC series
Operating Pressure: ±1PSI (±6.89kPa)
SSCMRRN001PDAA3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SSCMRRN001PDAA3 Transducers applications.
- Variometers
- Barometers
- Consumer applications
- Enhancement of GPS navigation
- Smart watches, wearable & smart phone ( e.g. altitude, fitness tracking, step counting, fall detection)
- Refrigerant pressure monitoring in HVAC/R systems
- Waterproof watches and diving computers
- Bike computers
- Mobile altimeter / barometer systems
- Infusion pumps