SSCSANN001BAAA3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | 4-SIP, Side Port |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C |
| Published | 2011 |
| Series | TruStability® SSC |
| Feature | Amplified Output, Temperature Compensated |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Applications | Board Mount |
| Additional Feature | TEMPERATURE COMPENSATED OVER -20 TO 85 DEG |
| Voltage - Rated DC | 3.3V |
| Voltage - Supply | 3V~3.6V |
| Reach Compliance Code | unknown |
| Output | 0.33 V ~ 2.97 V |
| Termination Style | PC Pin |
| Body Length or Diameter | 13.85mm |
| Body Breadth | 9.91 mm |
| Output Voltage | 2.97V |
| Output Type | Analog Voltage |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 1.6mA |
| Max Supply Current | 2.1mA |
| Number of Bits | 12 |
| Accuracy | ±0.25% |
| Response Time | 1 ms |
| Operating Pressure | 14.5PSI (100kPa) |
| Pressure Type | Absolute |
| Port Style | Barbed |
| Port Size | Male - 0.19 4.93mm Tube |
| Maximum Pressure | 29.01PSI (200kPa) |
| Sensors/Transducers Type | PRESSURE SENSOR,PEIZORESISTIVE |
| Housing | CERAMIC |
| Max Pressure | 29.01 PSI |
| RoHS Status | RoHS Compliant |
SSCSANN001BAAA3 Overview
In order to make your life easier, a 4-SIP, Side Port package includes this transducer. Ensure reliable performance by setting the transducers to -40°C~85°C. With a voltage supply of 3V~3.6V, the transducers can function properly. In order for the transducers to function properly, the 4 pins must be connected. When the nominal supply current is 1.6mA, the transducers can operate normally. This device requires a voltage release from the transducers of 2.97V to function effectively. It is recommended that the DC voltage be set to 3.3V so that the transducers can continuously operate at their rated ambient temperature. The current of the transducers should not exceed 2.1mA, otherwise it will be dangerous.
SSCSANN001BAAA3 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 4-SIP, Side Port
Operating Temperature: -40°C~85°C
4 Pins
TruStability? SSC series
Operating Pressure: 14.5PSI (100kPa)
Operating Supply Voltage: 3.3V
SSCSANN001BAAA3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SSCSANN001BAAA3 Transducers applications.
- Mobile phones / GPS
- Weather forecast
- High resolution altimeters, variometers
- Process Control
- Consumer applications
- Internet of things
- Mobile Phones
- Refrigerant pressure monitoring in HVAC/R systems
- Indoor navigation & localization (floor detection, elevator detection)
- Pressure controller
