SSM2135S
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SSM2135 |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 7.6mA |
| Nominal Supply Current | 6mA |
| Max Supply Current | 2.8mA |
| Quiescent Current | 3.8mA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 112 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 30mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 200μV |
| Settling Time | 5.8 μs |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Dual Supply Voltage | 15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SSM2135S Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called Audio-types. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. The input offset voltage is 2mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 7.6mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 126.02dB at all times. There are 1 circuits on this op amp. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of instrumentation amplifier is rated 28V voltage. The quiescent current is 3.8mA.
SSM2135S Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
SSM2135S Applications
There are a lot of Analog Devices Inc. SSM2135S Instrumentational OP Amps applications.
- Video data acquisition
- Active probe
- Video computer boards
- Information processing
- Portable media players
- Ultrasound transducers
- Signal amplification
- Hand-held batteries
- Home audio systems
- single/dual op amp sum and difference circuits
