SSM2135S-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SSM2135 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 7.6mA |
| Nominal Supply Current | 6mA |
| Quiescent Current | 3.8mA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 112 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 30mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 200μV |
| Settling Time | 5.8 μs |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SSM2135S-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the Audio type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 2mV. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 7.6mA . 126.02dB should be the voltage gain. In total, there are 1 circuits on this buffer amplifier. It is possible to count 2 elements on this buffer amplifier. This linear amplifier pack is based on the TAPE AND REEL axis. Currently, linear amplifier is operating with a quiescent current of 3.8mA.
SSM2135S-REEL7 Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
SSM2135S-REEL7 Applications
There are a lot of Analog Devices Inc. SSM2135S-REEL7 Instrumentational OP Amps applications.
- Power generator
- Image computer boards
- Portable docking station
- Video computer boards
- Division circuits
- RF cable systems
- Medical instruments
- Active probe
- Car stereo
- Integrator circuits
