SSM2135SZ-REEL
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SSM2135 |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 7.6mA |
| Quiescent Current | 3.8mA |
| Supply Current-Max | 5mA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 112 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 30mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 200μV |
| Settling Time | 5.8 μs |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Dual Supply Voltage | 15V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
SSM2135SZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Audio-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 7.6mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 126.02dB is the best course of action. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 28V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL. There is an 3.8mA quiescent current running through op amp ic.
SSM2135SZ-REEL Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
SSM2135SZ-REEL Applications
There are a lot of Analog Devices Inc. SSM2135SZ-REEL Instrumentational OP Amps applications.
- High gain DC amplifier
- Proportional counter tubes
- Voltage regulation circuit
- Division circuits
- Home audio systems
- Power generator
- Multiplication circuits
- Band-stop filter
- Integrator circuits
- Switching amplifier
