SSM2135SZ-REEL7
| Parameters | |
|---|---|
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 200μV |
| Settling Time | 5.8 μs |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SSM2135 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 7.6mA |
| Nominal Supply Current | 6mA |
| Quiescent Current | 3.8mA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 112 dB |
| Current - Input Bias | 300nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 30mA |
SSM2135SZ-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the Audio type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 8 pins on this chip. There is an input offset voltage of 2mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 7.6mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 126.02dB is the best course of action. There are 2 channels on the operational amplifiers. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. There is a quiescent current of 3.8mA in this operational amplifier circuit.
SSM2135SZ-REEL7 Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
SSM2135SZ-REEL7 Applications
There are a lot of Analog Devices Inc. SSM2135SZ-REEL7 Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- PDA
- Subtraction operation circuits
- Fast A/D and D/A converters
- Signal filtering
- Polarized electrodes
- Band-pass filter
- Test and measurement instruments
- Tablets
- Automotive sensors
