SSM2141PZ
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | SSM2141 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 3.5mA |
| Slew Rate | 9.5V/μs |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 100 dB |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | ±6V~18V |
| Output Current per Channel | 45mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 123.1dB |
| -3db Bandwidth | 3MHz |
| Voltage Gain-Nom | 1 |
| Load Impedance | 600Ohm |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SSM2141PZ Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. Op amps are Audio types of amplifier on the chip. A Tube case is used for delivering the op amp. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Instrumentation Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 25μV voltage. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 3.5mA . There are a total of 1 elements in this linear amplifier.
SSM2141PZ Features
8 Pins
supply voltage of 15V
SSM2141PZ Applications
There are a lot of Analog Devices Inc. SSM2141PZ Instrumentational OP Amps applications.
- Power transmission
- Weak signal detection
- Ultrasound transducers
- Test equipment
- Television broadcasting equipment
- Division circuits
- Communication
- Portable media players
- Multiplication circuits
- Home audio systems
