SSM2317CBZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, WLCSP |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SSM2317 |
| Pin Count | 9 |
| Qualification Status | Not Qualified |
| Efficiency | 93 % |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Operating Supply Current | 3.2mA |
| Nominal Supply Current | 3.6mA |
| Output Power | 3W |
| Common Mode Rejection Ratio | 57 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 18dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 3.89W |
| Signal to Noise Ratio (SNR) | 93 dB |
| Max Output Power x Channels @ Load | 3.89W x 1 @ 3 Ω |
| Harmonic Distortion | 10% |
| Source Url Status Check Date | 2013-05-01 14:56:54.765 |
| Height Seated (Max) | 0.655mm |
| Length | 1.46mm |
| Width | 1.46mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SSM2317CBZ-REEL7 Overview
This package is embedded in 9-WFBGA, WLCSP .The device is in the form of Tape & Reel (TR) .9 terminations consist of terminating transmission lines with devices that match their characteristic impedance.This output is configured with 1-Channel (Mono) .This electrical device is classified as type Class D .9 pins are pronged contacts on a computer or other communication device that form a signal interface.The electronic part is positioned in the way of Surface Mount .In this electrical device, the supply voltage is 2.5V~5.5V .There are 1 channels available on the device.During operation, the value Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.A maximum operating temperature of -40°C~85°C TA should be maintained.The device is equipped with a total of 9 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is included in the SSM2317 family.This electronic part is mounted in the way of Surface Mount .This electronic component's maximum output power is 3.89W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.The maximal supply voltage (Vsup) reaches 5.5V .Amp parts is a Single supply type.Power supply for this device is 5V volts.
SSM2317CBZ-REEL7 Features
9-WFBGA, WLCSP package
9 pin count
SSM2317 family
3.89W kWh per hour
SSM2317CBZ-REEL7 Applications
There are a lot of Analog Devices Inc. SSM2317CBZ-REEL7 audio amplifiers applications.
- Multiplication and division circuits
- Power control
- single/dual op amp sum and difference circuits
- Addition and subtraction operation circuits
- Logarithmic and exponential operation circuits
- ECG equipment
- Semiconductor detectors
- Test and measurement instruments
- Switching amplifier
- Fast A/D and D/A converters, video amplifiers
