SSTUB32S869BHLFT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TFBGA |
| Number of Pins | 150 |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 340MHz |
| Pin Count | 150 |
| Number of Outputs | 28 |
| Operating Supply Voltage | 1.8V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of Bits | 14 |
| Propagation Delay | 3 ns |
| High Level Output Current | -16mA |
| Low Level Output Current | 16mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 13mm |
| Width | 8mm |
| Thickness | 1.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SSTUB32S869BHLFT Overview
There is a packaging of TFBGA for convenient transport of the power buffer.It has been packaged into Tape & Reel (TR) packages, so power buffer is ready to be shipped.As far as the pinout is concerned, the Power buffer has 150 pins starting at its 150 axis.Pins on its 150 axis are present.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.The voltage required for normal operation is 1.8V.A 1 element interface repeater signal is what we are dealing with here.Lower temperatures than 0°C are unsuitable for it.You should not exceed 70°C in terms of temperature.28 outputs can be output by it.
SSTUB32S869BHLFT Features
28 outputs.
SSTUB32S869BHLFT Applications
There are a lot of Integrated Device Technology (IDT) SSTUB32S869BHLFT Signal Buffers, Repeaters, Splitters applications.
- Industrial/Embedded PC
- Portable IPC/HMI
- Servers
- Digital Crossconnects
- Clock Distribution
- PECL-to-LVDS Translation
- Network Switches/Routers
- Cable Repeaters
- Digital Cross-Connects
- Communications Switchers
